zou er iemand zijn configuratiebestand kunnen doorsturen?
&
hoe configureer ik dhcp? (als ik het aanzet krijg ik geen verbinding)
of hoe kan ik een 2e toestel aansluiten op deze modem (lukt niet)? Moet je echt een switch daarvoor hebben? (4 ethernet uitgangen).
VDSL aerthra configuratie instellingen gezocht.
<img src="http://users.skynet.be/reutel/dommel.png" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
-zou je uw configuratiefile kunnen doorsturen naar [email protected]? ( zou mij veel werk kunnen uitsparen)Lion schreef:ik gebruik die in bridge mode
wel ook even meedelen dat er maar twee poorten voor internet beschikbaar zijn de twee andere zijn voor belgacomTV geprogrameerd
Hoe gaat dat dan in zijn werk?
RFC1983bridge selecteren? en de andere router eraan hangen?
Wat zijn eigenlijk de instellingen voor vdsl?
VCI 0
VPI 62
ppoA?ppoE?RFC?andere?
remote ip?
LLC aan?
andere instellingen in de modem?
Heb er al een uur of 6 op gezocht, blijkbaar moet je bij elke wijziging de modem rebooten.
<img src="http://users.skynet.be/reutel/dommel.png" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
dit vond ik op userbase:
top
set system name ATOS001293
set system localdomain LocalDomain
set system deftftpserver 0.0.0.0
set system aaa-profile
set system bkp-auth on
set system loglevel 1
set system scroll-line 22
set system timesync off
set system timesync frequency 43200
set system timesync gmt-offset 120
set system timesync loglevel 1
set dhcp on
set dhcp server-timeout 0
set dhcp loglevel 1
dhcp
add lan0_pool LAN0
top
set dhcp lan0_pool learning off
set dhcp lan0_pool learning-wan wan3
set dhcp lan0_pool startaddress 10.0.0.5
set dhcp lan0_pool endaddress 10.0.0.10
set dhcp lan0_pool netmask 255.255.255.0
set dhcp lan0_pool defaultrouter 10.0.0.2
set dhcp lan0_pool dns1 10.0.0.2
set dhcp lan0_pool dns2 0.0.0.0
set dhcp lan0_pool wins1 0.0.0.0
set dhcp lan0_pool wins2 0.0.0.0
set dhcp lan0_pool leasetime 7200
set dhcp lan0_pool hostname PC_0
set dhcp lan0_pool domainname LocalDomain
set dhcp lan0_pool relay off
set dhcpclient loglevel 1
set dns off
set dns maxretries 3
set dns timeout 20
set dns defaulthost on
set dns loglevel 1
dns
add 2
top
set napt on
set napt tcptimeout 100
set napt udptimeout 100
set napt connectedhost off
set napt defaultserver 0.0.0.0
set napt loglevel 2
set napt h323-connection 1
set napt h323-gatekeeper off
set napt sip-port-start 5060
set napt sip-port-range 0
set ip loglevel 3
set ip subnet-zero off
ip route
add 0.0.0.0 0.0.0.0 0.0.0.0 ATM_VC0 0
add 192.168.1.0 255.255.255.0 10.0.0.2 LAN0 1
top
set ip route loglevel 1
set ip rip off
set ip rip routeadvice off
set ip bgp off
set ip bgp hold-timer 90
set ip bgp as-number 0
set ip bgp loglevel 1
top
set intservices telnet 23
set intservices http 80
set multicast on
set multicast igmp-snooping on
set multicast loglevel 1
set multicast igmp-association-delete-timer 80
set bridges bridge1 on
set snmp on
set snmp read_community_name public
set snmp write_community_name private
set snmp manager 0.0.0.0
set snmp alternativemanager 0.0.0.0
set snmp authentication_trap on
set snmp syscontact
set snmp syslocation
set snmp enable_write_message off
set snmp loglevel 1
set security ike loglevel 1
set security ipsec loglevel 1
set accesslist loglevel 1
set aaa loglevel 1
set syslog off
set syslog echo on
set syslog server 0.0.0.0
set syslog syslog-port 514
set syslog loglevel 2
set vdsl loglevel 1
set vdsl hand-shake V43
set loopback loglevel 1
set lan0 bridging on
set lan0 ip address 10.0.0.1
set lan0 ip netmask 255.255.255.0
set lan0 ip defaultrouter 10.0.0.2
set lan0 l2switch port3 default-vid 5
set lan0 l2switch port4 default-vid 5
set lan1 bridging on
set lan1 wireless radio-enable off
set lan1 wireless ssid LAN1-AP001293
set lan1 wireless security wpa key-value ATOS-WPA-PASSPHRASE
set lan1 wireless ap rf-channel 11
set wan1 on
set wan1 bridging on
set wan1 remoteadmin off
set wan1 ip mtu 1492
set wan1 ip rip off
set wan1 atm traffic-type UBR 65535
set wan1 atm vpi 0
set wan1 atm vci 62
set wan1 service encapsulation RFC1483Bridged
set wan1 bridgepar cost 434
set wan2 bridging on
set wan2 remoteadmin off
set wan2 ip napt off
set wan2 ip rip off
set wan2 atm traffic-type UBR+ 448 448
set wan2 atm vpi 0
set wan2 atm vci 32
set wan2 service encapsulation RFC1483Bridged
set wan2 bridgepar Bridge2
set wan3 bridging on
set wan3 remoteadmin off
set wan3 ip napt off
set wan3 ip rip off
set wan3 atm traffic-type CBR 448
set wan3 atm vpi 1
set wan3 atm vci 32
set wan3 service encapsulation RFC1483Bridged
set wan3 bridgepar Bridge2
set wan3 bridgepar fwd-mcast-only on
set wan4 bridging on
set wan4 remoteadmin off
set wan4 ip napt off
set wan4 ip rip off
set wan4 atm traffic-type CBR 0
set wan4 atm vpi 1
set wan4 atm vci 33
set wan4 service encapsulation RFC1483Bridged
set wan4 bridgepar Bridge2
set wan4 bridgepar flow-direction rx
set wan5 bridging on
set wan5 remoteadmin off
set wan5 ip napt off
set wan5 ip rip off
set wan5 atm traffic-type CBR 0
set wan5 atm vpi 1
set wan5 atm vci 34
set wan5 service encapsulation RFC1483Bridged
set wan5 bridgepar Bridge2
set wan5 bridgepar flow-direction rx
set wan6 bridging on
set wan6 remoteadmin off
set wan6 ip napt off
set wan6 ip rip off
set wan6 atm traffic-type CBR 0
set wan6 atm vpi 1
set wan6 atm vci 35
set wan6 service encapsulation RFC1483Bridged
set wan6 bridgepar Bridge2
set wan6 bridgepar flow-direction rx
set wan7 bridging on
set wan7 remoteadmin off
set wan7 ip napt off
set wan7 ip rip off
set wan7 atm traffic-type CBR 0
set wan7 atm vpi 1
set wan7 atm vci 36
set wan7 service encapsulation RFC1483Bridged
set wan7 bridgepar Bridge2
set wan7 bridgepar flow-direction rx
set wan8 bridging on
set wan8 remoteadmin off
set wan8 ip napt off
set wan8 ip rip off
set wan8 atm traffic-type CBR 0
set wan8 atm vpi 1
set wan8 atm vci 37
set wan8 service encapsulation RFC1483Bridged
set wan8 bridgepar Bridge2
set wan8 bridgepar flow-direction rx
set wan9 bridging on
set wan9 remoteadmin off
set wan9 ip napt off
set wan9 ip rip off
set wan9 atm traffic-type CBR 0
set wan9 atm vpi 1
set wan9 atm vci 38
set wan9 service encapsulation RFC1483Bridged
set wan9 bridgepar Bridge2
set wan9 bridgepar flow-direction rx
set wan10 bridging on
set wan10 remoteadmin off
set wan10 ip napt off
set wan10 ip rip off
set wan10 atm traffic-type CBR 0
set wan10 atm vpi 1
set wan10 atm vci 39
set wan10 service encapsulation RFC1483Bridged
set wan10 bridgepar Bridge2
set wan10 bridgepar flow-direction rx
set wan11 bridging on
set wan11 remoteadmin off
set wan11 ip napt off
set wan11 ip rip off
set wan11 atm traffic-type CBR 0
set wan11 atm vpi 1
set wan11 atm vci 40
set wan11 service encapsulation RFC1483Bridged
set wan11 bridgepar Bridge2
set wan11 bridgepar flow-direction rx
set wan12 bridging on
set wan12 remoteadmin off
set wan12 ip napt off
set wan12 ip rip off
set wan12 atm traffic-type CBR 0
set wan12 atm vpi 1
set wan12 atm vci 41
set wan12 service encapsulation RFC1483Bridged
set wan12 bridgepar Bridge2
set wan12 bridgepar flow-direction rx
set wan13 bridging on
set wan13 remoteadmin off
set wan13 ip napt off
set wan13 ip rip off
set wan13 atm traffic-type CBR 0
set wan13 atm vpi 1
set wan13 atm vci 42
set wan13 service encapsulation RFC1483Bridged
set wan13 bridgepar Bridge2
set wan13 bridgepar flow-direction rx
set wan14 bridging on
set wan14 remoteadmin off
set wan14 ip napt off
set wan14 ip rip off
set wan14 atm traffic-type CBR 0
set wan14 atm vpi 1
set wan14 atm vci 43
set wan14 service encapsulation RFC1483Bridged
set wan14 bridgepar Bridge2
set wan14 bridgepar flow-direction rx
set wan15 bridging on
set wan15 remoteadmin off
set wan15 ip rip off
set wan15 service encapsulation RFC1483Bridged
set wan15 bridgepar Bridge2
set wan15 bridgepar flow-direction rx
set wan16 bridging on
set wan16 remoteadmin off
set wan16 ip rip off
set wan16 service encapsulation RFC1483Bridged
set wan16 bridgepar Bridge2
set wan16 bridgepar flow-direction rx
http://www.userbase.be/forum/viewtopic. ... light=vdsl
kloppen die settings nog?
top
set system name ATOS001293
set system localdomain LocalDomain
set system deftftpserver 0.0.0.0
set system aaa-profile
set system bkp-auth on
set system loglevel 1
set system scroll-line 22
set system timesync off
set system timesync frequency 43200
set system timesync gmt-offset 120
set system timesync loglevel 1
set dhcp on
set dhcp server-timeout 0
set dhcp loglevel 1
dhcp
add lan0_pool LAN0
top
set dhcp lan0_pool learning off
set dhcp lan0_pool learning-wan wan3
set dhcp lan0_pool startaddress 10.0.0.5
set dhcp lan0_pool endaddress 10.0.0.10
set dhcp lan0_pool netmask 255.255.255.0
set dhcp lan0_pool defaultrouter 10.0.0.2
set dhcp lan0_pool dns1 10.0.0.2
set dhcp lan0_pool dns2 0.0.0.0
set dhcp lan0_pool wins1 0.0.0.0
set dhcp lan0_pool wins2 0.0.0.0
set dhcp lan0_pool leasetime 7200
set dhcp lan0_pool hostname PC_0
set dhcp lan0_pool domainname LocalDomain
set dhcp lan0_pool relay off
set dhcpclient loglevel 1
set dns off
set dns maxretries 3
set dns timeout 20
set dns defaulthost on
set dns loglevel 1
dns
add 2
top
set napt on
set napt tcptimeout 100
set napt udptimeout 100
set napt connectedhost off
set napt defaultserver 0.0.0.0
set napt loglevel 2
set napt h323-connection 1
set napt h323-gatekeeper off
set napt sip-port-start 5060
set napt sip-port-range 0
set ip loglevel 3
set ip subnet-zero off
ip route
add 0.0.0.0 0.0.0.0 0.0.0.0 ATM_VC0 0
add 192.168.1.0 255.255.255.0 10.0.0.2 LAN0 1
top
set ip route loglevel 1
set ip rip off
set ip rip routeadvice off
set ip bgp off
set ip bgp hold-timer 90
set ip bgp as-number 0
set ip bgp loglevel 1
top
set intservices telnet 23
set intservices http 80
set multicast on
set multicast igmp-snooping on
set multicast loglevel 1
set multicast igmp-association-delete-timer 80
set bridges bridge1 on
set snmp on
set snmp read_community_name public
set snmp write_community_name private
set snmp manager 0.0.0.0
set snmp alternativemanager 0.0.0.0
set snmp authentication_trap on
set snmp syscontact
set snmp syslocation
set snmp enable_write_message off
set snmp loglevel 1
set security ike loglevel 1
set security ipsec loglevel 1
set accesslist loglevel 1
set aaa loglevel 1
set syslog off
set syslog echo on
set syslog server 0.0.0.0
set syslog syslog-port 514
set syslog loglevel 2
set vdsl loglevel 1
set vdsl hand-shake V43
set loopback loglevel 1
set lan0 bridging on
set lan0 ip address 10.0.0.1
set lan0 ip netmask 255.255.255.0
set lan0 ip defaultrouter 10.0.0.2
set lan0 l2switch port3 default-vid 5
set lan0 l2switch port4 default-vid 5
set lan1 bridging on
set lan1 wireless radio-enable off
set lan1 wireless ssid LAN1-AP001293
set lan1 wireless security wpa key-value ATOS-WPA-PASSPHRASE
set lan1 wireless ap rf-channel 11
set wan1 on
set wan1 bridging on
set wan1 remoteadmin off
set wan1 ip mtu 1492
set wan1 ip rip off
set wan1 atm traffic-type UBR 65535
set wan1 atm vpi 0
set wan1 atm vci 62
set wan1 service encapsulation RFC1483Bridged
set wan1 bridgepar cost 434
set wan2 bridging on
set wan2 remoteadmin off
set wan2 ip napt off
set wan2 ip rip off
set wan2 atm traffic-type UBR+ 448 448
set wan2 atm vpi 0
set wan2 atm vci 32
set wan2 service encapsulation RFC1483Bridged
set wan2 bridgepar Bridge2
set wan3 bridging on
set wan3 remoteadmin off
set wan3 ip napt off
set wan3 ip rip off
set wan3 atm traffic-type CBR 448
set wan3 atm vpi 1
set wan3 atm vci 32
set wan3 service encapsulation RFC1483Bridged
set wan3 bridgepar Bridge2
set wan3 bridgepar fwd-mcast-only on
set wan4 bridging on
set wan4 remoteadmin off
set wan4 ip napt off
set wan4 ip rip off
set wan4 atm traffic-type CBR 0
set wan4 atm vpi 1
set wan4 atm vci 33
set wan4 service encapsulation RFC1483Bridged
set wan4 bridgepar Bridge2
set wan4 bridgepar flow-direction rx
set wan5 bridging on
set wan5 remoteadmin off
set wan5 ip napt off
set wan5 ip rip off
set wan5 atm traffic-type CBR 0
set wan5 atm vpi 1
set wan5 atm vci 34
set wan5 service encapsulation RFC1483Bridged
set wan5 bridgepar Bridge2
set wan5 bridgepar flow-direction rx
set wan6 bridging on
set wan6 remoteadmin off
set wan6 ip napt off
set wan6 ip rip off
set wan6 atm traffic-type CBR 0
set wan6 atm vpi 1
set wan6 atm vci 35
set wan6 service encapsulation RFC1483Bridged
set wan6 bridgepar Bridge2
set wan6 bridgepar flow-direction rx
set wan7 bridging on
set wan7 remoteadmin off
set wan7 ip napt off
set wan7 ip rip off
set wan7 atm traffic-type CBR 0
set wan7 atm vpi 1
set wan7 atm vci 36
set wan7 service encapsulation RFC1483Bridged
set wan7 bridgepar Bridge2
set wan7 bridgepar flow-direction rx
set wan8 bridging on
set wan8 remoteadmin off
set wan8 ip napt off
set wan8 ip rip off
set wan8 atm traffic-type CBR 0
set wan8 atm vpi 1
set wan8 atm vci 37
set wan8 service encapsulation RFC1483Bridged
set wan8 bridgepar Bridge2
set wan8 bridgepar flow-direction rx
set wan9 bridging on
set wan9 remoteadmin off
set wan9 ip napt off
set wan9 ip rip off
set wan9 atm traffic-type CBR 0
set wan9 atm vpi 1
set wan9 atm vci 38
set wan9 service encapsulation RFC1483Bridged
set wan9 bridgepar Bridge2
set wan9 bridgepar flow-direction rx
set wan10 bridging on
set wan10 remoteadmin off
set wan10 ip napt off
set wan10 ip rip off
set wan10 atm traffic-type CBR 0
set wan10 atm vpi 1
set wan10 atm vci 39
set wan10 service encapsulation RFC1483Bridged
set wan10 bridgepar Bridge2
set wan10 bridgepar flow-direction rx
set wan11 bridging on
set wan11 remoteadmin off
set wan11 ip napt off
set wan11 ip rip off
set wan11 atm traffic-type CBR 0
set wan11 atm vpi 1
set wan11 atm vci 40
set wan11 service encapsulation RFC1483Bridged
set wan11 bridgepar Bridge2
set wan11 bridgepar flow-direction rx
set wan12 bridging on
set wan12 remoteadmin off
set wan12 ip napt off
set wan12 ip rip off
set wan12 atm traffic-type CBR 0
set wan12 atm vpi 1
set wan12 atm vci 41
set wan12 service encapsulation RFC1483Bridged
set wan12 bridgepar Bridge2
set wan12 bridgepar flow-direction rx
set wan13 bridging on
set wan13 remoteadmin off
set wan13 ip napt off
set wan13 ip rip off
set wan13 atm traffic-type CBR 0
set wan13 atm vpi 1
set wan13 atm vci 42
set wan13 service encapsulation RFC1483Bridged
set wan13 bridgepar Bridge2
set wan13 bridgepar flow-direction rx
set wan14 bridging on
set wan14 remoteadmin off
set wan14 ip napt off
set wan14 ip rip off
set wan14 atm traffic-type CBR 0
set wan14 atm vpi 1
set wan14 atm vci 43
set wan14 service encapsulation RFC1483Bridged
set wan14 bridgepar Bridge2
set wan14 bridgepar flow-direction rx
set wan15 bridging on
set wan15 remoteadmin off
set wan15 ip rip off
set wan15 service encapsulation RFC1483Bridged
set wan15 bridgepar Bridge2
set wan15 bridgepar flow-direction rx
set wan16 bridging on
set wan16 remoteadmin off
set wan16 ip rip off
set wan16 service encapsulation RFC1483Bridged
set wan16 bridgepar Bridge2
set wan16 bridgepar flow-direction rx
http://www.userbase.be/forum/viewtopic. ... light=vdsl
kloppen die settings nog?
<img src="http://users.skynet.be/reutel/dommel.png" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
is in orde, gewoon andere router aangehangen!
<img src="http://users.skynet.be/reutel/dommel.png" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
<img src="http://img114.imageshack.us/img114/7295/588iq3.jpg" border="0">
